Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? Ja Nee Meer over cookies »

Primary Airsoft ANGLED Hi-Capa HPA M4 Adapter

Primary Airsoft ANGLED Hi-Capa HPA M4 Adapter

€ 129,90 Incl. btw
Beschikbaarheid:
Almost sold out
Toevoegen aan winkelwagen
Categorieën: Primary + Monk
Vergelijk
  • Only the quality parts for tm hicapa
  • 24/7 Webshop with fast shipping
  • Loyalty Program available!

Included:

- 1x Primary Angled M4 Hicapa Adapter

- 1x long magazine screw hex

- 1x shortstroke ring printed

 

Our 4th generation Hi-Capa M4 angled adapter is 3D from a strong nylon material.

This adapter allows you to use HPA (high pressure air) and M4 AEG magazines on your Hi-Capa airsoft pistol. To use it you will also need an M4 AEG magazine, “paintball” tank with low pressure regulator (0-140 psi), a hose with a Foster (polarstar) quick disconnect and of course bbs. The normal operating pressure for green gas is roughly 120 psi depending on the temperature. We recommend that you run your pistol near this pressure and do not exceed 140 psi. Keep in mind that higher pressures can cause excessive wear and damage to the internal components of your airsoft pistol.

We recommend that you use high quality M4 AEG magazines with strong springs for the most consistent performance.  Do not leave your magazines loaded with bbs for an extended period of time as this will cause the springs to fatigue and lose performance. Worn out AEG magazine springs should be replaced with superfeed springs. 

Please watch the installation video on YouTube titled: Primary Airsoft adapter installation tutorial HPA and M4 Glock + Hi-capa           

https://youtu.be/AydmykdSGSM

The adapter now comes with a longer screw which has a 2.5mm hex head. They also come with our new universal feed tube that will fit the following magazines:

Tokyo Marui Hi-capa magazines 5.1 and 4.3

WE Tech/Armorer Works Hi-capa magazines 5.1 ONLY "long baseplate"

***(Our adapters do NOT fit WE Tech 4.3 magazines "short baseplate")***

Novritsch SSP1/KJ Works Hi-capa Magazines. 

Guarder light weight aluminum magazine bodies. 

The metal quick disconnect fitting in the photos will come installed. The fitting is a US standard Foster Pneumatics 1/8 NPT quick disconnect. The fitting can be changed to any fitting that has 1/8 NPT threads. Be sure not to cross thread the fitting when installing a different one. The adapter does not come with a gun, magazine or any other accessories. The included plastic spacer can be used to short stroke your slide if you want to use it. 

 

Er zijn nog geen reviews geschreven over dit product.

Reviews

Er zijn nog geen reviews geschreven over dit product.

Nieuwsbrief

Lees hier de wettelijke beperkingen

Er zijn nog geen reviews geschreven over dit product.

Get the latest news

Subscribe to our newsletter and get the latest news and discounts as early as possible